4 rack-mount the router, Rack-mount the router, Sfp gbic port – Cisco 7301 User Manual
Page 6: Latch beneath plug, Rack-mount bracket, Tx rx gbic
6
Figure 3
Inserting a SFP GBIC Module into a SFP GBIC Port
Step 1
Turn the SFP GBIC module so the latch is on the bottom. The SFP GBIC module is keyed to be inserted correctly.
Step 2
Insert the SFP GBIC module into SFP port 0/0, 0/1, or 0/2. Repeat Step 2 if you are inserting a second or third SFP GBIC
module.
Step 3
Do not remove the SFP GBIC module plugs until you are ready to install the cables.
4
Rack-Mount the Router
This section provides information for rack-mounting the router.
Attach the Rack-Mount Brackets—Chassis Front-Mounted
Figure 4
Attaching the Rack-Mount Brackets to the Front of the Chassis
1
SFP GBIC port
2
Latch beneath plug
1
Rack-mount bracket
2
4 screws, 8-18 x .37 in., for use with a 19-inch rack
4 screws, 8 x .375 in., for use in a 21–23-inch rack
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERNET 0/2
ETHERNET 0/0
LINK
TX
RX
GBIC
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERNET 0/1
SERIES
CONSOLE
AUX
COMPAC
FLASH
80269
2
TX
RX
TX
RX
GBIC
1
1
2
ALARM
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERNET 0/2
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERNET 0/0
RJ45 EN
LINK
TX
RX
GBIC
GIGABIT ETHERNET 0/1
CISCO 7301
SLOT 1
CONSOLE
AUX
COMPACT
FLASH
STATUS
100-240V
, 2A, 50/60 Hz
24V=9A, 48 - 60V
=5A
ENABLEDRX CELLSRX CARRIER
RX ALARM
ATM
80906
B
A