Configuring an ip phone service parameter, Configuring an ip phone service – Cisco OL-21852-01 User Manual
Page 11
101-11
Cisco Unified Communications Manager Administration Guide
OL-21852-01
Chapter 101 IP Phone Services Configuration
Configuring an IP Phone Service Parameter
If you try to delete an IP phone service that is in use, Cisco Unified Communications Manager displays
a message. Before deleting an IP phone service that is currently in use, you must perform either or both
of the following tasks:
•
Assign a different IP phone service to any devices that are using the IP phone service that you want
to delete. See the
“Deleting a Phone” section on page 92-37
.
•
Delete the devices that are using the IP phone service that you want to delete. See the
“Deleting a
Phone” section on page 92-37
.
Procedure
Step 1
Find the IP phone service by using the procedure in the
“Finding an IP Phone Service” section on
.
Step 2
Click the name of the IP phone service that you want to delete.
The IP phone services Configuration window displays.
Step 3
Click Delete.
You receive a message that asks you to confirm the deletion.
Step 4
Click OK.
The window refreshes, and the IP phone service gets deleted from the database.
Additional Information
See the
“Related Topics” section on page 101-14
Configuring an IP Phone Service Parameter
Use the following procedure to add and configure or update IP phone service parameters. Add the phone
service before you configure parameters. Refer to the documentation for the individual IP phone service
for specific information about whether the service uses parameters, how those parameters should be
configured, and whether you should provide optional parameter definitions.
Procedure
Step 1
Find the IP phone service by using the procedure in the
“Finding an IP Phone Service” section on
.
Step 2
From the IP phone services list, choose the service to which you want to add parameters or update
existing parameters.
The IP phone services Configuration window displays.
Step 3
Perform one of the followings tasks:
•
To add a new phone service parameter, click the New button to the right of the Parameters list box.
The Configure IP phone service Parameter window displays. Continue with
•
To update an existing parameter, choose the name of the parameter that you want to update in the
Parameters list box. Click Edit and continue with
.