Sharp AQUOS Crystal - Manual (Page 167)

165
Connectivity
AQUOS CRYSTAL
Connecting Selected Access Points
Enable handset Wi-Fi first.
In app sheet, (Settings) Wi-Fi settings
Wi-Fi settings opens.
Tap access point
Enter password Connect
Handset connects to the access point.
・Password (indicated by WEP, WPA, KEY, etc.) may be found
on a label on your Wi-Fi router. For details, contact the
vendor of the router. For public wireless LAN services, check
the password with your ISP.
・Omit password entry for unprotected access points.
Wi-Fi Operations
Connecting Access Points Manually
In Wi-Fi settings, ADD NETWORK Enter Network
SSID Done Tap Security field Tap security
protocol Save
・Available when Wi-Fi settings is enabled.
・Depending on security protocol, other fields may also
need to be completed.
Connecting Using AOSS
In Wi-Fi settings, EASY SETTINGS AOSS Follow
onscreen prompts
Connecting Using WPS
In Wi-Fi settings, EASY SETTINGS WPS Push
Button Follow onscreen prompts
・Available when Wi-Fi settings is enabled.
・To connect using the PIN method, Tap EASY SETTINGS
in Wi-Fi settings, Tap WPS Pin Entry , then follow
onscreen prompts.
Troubleshooting
Q. Cannot detect access points
A. There may be multiple access points using neighboring
channels. In this instance, handset may not detect
access points correctly.
Disconnecting Wi-Fi
In app sheet, (Settings) Wi-Fi settings
Wi-Fi settings opens.
Tap connected access point Disconnect
Wi-Fi is disconnected.
・Password entry may be required to reconnect to access
point.