Keri Systems KPS-525 - Manual

KPS-525 Power Supply
Installation Guide
Page 1 of 2 P/N: 01510-001 Rev. A
Section 1 – Wiring and Layout Diagram
Section 2 – Specifications and Cable Requirements
Section 3 – Keri Contact Information
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
1.0 Wiring and Layout Diagram
1.1 KPS-525
2.0 Specifications
2.1 Dimensions
• PCB
-
2.50” inches tall by 3.85” inches wide (including heat sink) by 1.6” inches deep (including heat sink, but not
including wiring connectors)
- 6.4 cm by 9.8 cm by 4.1 cm
• Enclosure
-
8.00 inches tall by 7.00 inches wide by 2.75 inches deep
- 20.32 cm by 17.78 cm by 6.98 cm