Keri Systems KRE-2 - Manual

KRE-2: Metal Enclosure
2305 Bering Drive 01854-001 Rev. E
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 1 of 4
KRE-2
Quick S
tart Guide
The KRE-2 Metal Enclosure
The KRE-2 Metal Enclosure is intended to provide a secure enclosure for the PXL-250 controller.
A lock on the enclosure cover ensures that only authorized hands have access to the controller (two
keys are provided). Twelve knockouts are spaced around the body of the enclosure providing
maximum flexibility for routing cabling into the controller. The enclosure is mounted to any solid
surface using four screws.
NOTE: The KRE-2 enclosure is not a sealed, weatherproof enclosure. It is not meant for use in
extreme environmental conditions.
1.0 Dimensions
• 12.1 inches High x 9.20 inches Wide x 4.5 inches Deep
• 30.73 cm High x 23.37 cm Wide x 11.43 cm Deep
Figure 1: KRE-2 Dimensions