KERN & SOHN IXS 300K-2M Platform - Manual (Page 4)

KXP_V20-BA-e-1310 4
3 Setting up the weighing platform
3.1 Selecting the site of installation
• The surface must be able to bear
the weighing platform under maxi-
mum load at the points of support.
At the same time it should be so
stable that no vibrations arise dur-
ing weighing. This is also to be ob-
served when installing the weighing
platform in conveyor and similar
systems.
• If possible, vibrations from
neighboring machines should not
occur at the site of installation.
3.2 Package volume
• Platform
• Protect screw
• Operation Manual
3.3 Protect screw
Protect screw