KERN & SOHN FXN 30K-2 - Manual (Page 15)

8 Operation
8.1 Weighing
 Start balance by pressing .
 The balance will carry out a self-test
 As soon as the weight display shows „0.0“ and the triangle symbol above the
stability display appears, the scale is ready for weighing.
 However, you can reset the weighing scale to zero by pressing
the button.
 Switch off balance using .
The „0.0“ display disappears and the balance is switched off.
8.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the weighed material is displayed in subsequent weighings.

 Put on weighing receptacles and press .
The zero display appears, and above the reset symbol
the stability symbol and the net weight symbol the
triangle appears.
The weight of the container is now internally saved.
 Place goods to be weighed in the weighing container.
The net weight of the goods to be weighed is displayed.
The weight of the weighing container will be displayed as a
minus number (=gross weight) after removing the weighing
container.
FXN-N-BA-e-1410 15