KERN & SOHN IEX 100K-1MEU - Manual (Page 11)

• Connect the mains connection to the power supply of 230V AC.
• For prolonged periods of inactivity disconnect the balance from the power supply.
• Press the ON/OFF
button and hold for approx. 1 second.
• After turning on the balance will carry out a self-test.
• Afterwards the balance will change to zero display, thus indicating readiness for
operation.
• The following icons will appear:
Zero indicator
Stability display
kg Weighing mode / weighing unit
6 Changing the installation site of the balance
• When the balance is to be taken to a different installation site
please follow the precautionary measures stated under chapter 5
of these operating instruction.
Doc.No.IEX-BA-e-1412 11