Level control, Level control -41, Automatic level control – Cadillac 2010 Escalade User Manual

Page 431

Advertising
background image

Two-wheel-drive vehicles should not be towed with
the rear wheels on the ground. Two-wheel-drive
transmissions have no provisions for internal lubrication
while being towed.

Dolly Towing (Rear Wheels Off the Ground)

Use the following procedure to dinghy tow a
two-wheel-drive vehicle from the rear:

1. Attach the dolly to the tow vehicle following the

dolly manufacturer's instructions.

2. Drive the rear wheels onto the dolly.

3. Firmly set the parking brake. See Parking Brake

on page 3‑38.

4. Put the transmission in P (Park).

5. Secure the vehicle to the dolly following the

manufacturer's instructions.

6. Use an adequate clamping device designed for

towing to ensure that the front wheels are locked
into the straight position.

7. Turn the ignition to LOCK/OFF.

Level Control

Automatic Level Control

The automatic level control rear suspension is available
on light‐duty vehicles and comes as a part of the
Autoride

®

suspension, if equipped.

This type of level control is fully automatic and will
provide a better leveled riding position as well as better
handling under a variety of passenger and loading
conditions. An air compressor connected to the rear
shocks will raise or lower the rear of the vehicle to
maintain proper vehicle height. The system is activated
when the ignition key is turned to ON/RUN and will
automatically adjust vehicle height thereafter. The
system may exhaust (lower vehicle height) for up to
ten minutes after the ignition key has been turned off.
You may hear the air compressor operating when the
height is being adjusted.

6-41

Advertising
This manual is related to the following products: