Kurgo Muted Floral Booster Seat - Manual

USING THE TETHER WITH YOUR VEHICLE’S SEAT BELT
1. Remove Carabiner (C) and loop tether around the Seatbelt (A) and pull back through tether handle.
2. Pull tether through Slide (B) located in the back of the Booster Seat.
3. Re-attach Carabiner (C) to strap and attach to harness leash hook.
WARNING: After clipping the tether strap to a dog harness, adjust the length of the strap
to keep dog from jumping out. Always use a harness with the booster seat, collars are not
suitable for automotive restraint. Never leave a dog unattended in the vehicle.
FIG. 3
FIG. 1
1 2 3
B C
A
B
D
Headrest Strap Adjuster
Headrest Strap
Seat Back Strap
Harness Tether
KEY
INSTALLATION & CARE
INSTALLATION IN VEHICLE:
1. Buckle the seat belt where the booster seat will be installed.
Loop strap over headrest. Use the Strap Adjuster
(B) to select a suitable height for your Booster Seat.
2. Wrap Back Strap (C) around the back of the seat
and clip buckles together. Pull strap to tighten. (FIG. 2)
3. Follow the instructions below (FIG. 3) to secure Tether (D).
Once Fido is attached you are ready to roll.
D
C
WASHING INSTRUCTIONS:
1. Brush off loose dirt with a dry brush.
2. As needed, wipe off with a damp sponge and mild soap. Liner is machine washable, hang to dry.
Become a fan on Facebook to receive our
updates, giveaways & contest info.
NOTICE: Thank you for your recent Kurgo purchase. If you have any questions or concerns please contact us directly before you
contact the retailer; we are great problem solvers. We hope that you will be happy with your purchase and will think of Kurgo next
time you travel with your dog.
978-465-5678 / [email protected]
See the complete Dog Travel line at www.kurgo.com
C
FIG. 2
6.13 For more information: 877.847.3868 :: www.kurgo.com :: [email protected]
A
Check with car
manufacturer
for air bag
guidelines.