LABEC V-18 - Manual (Page 15)

16/18 Manual
12
1
ENTER
2
RETURN
3
Fig. 16
1、Standard Curve
2、Relative Coefficient.
3、Curve Equation
C=1.001*A+0.2,
C: Concentration
A: Value of Abs.
The slop value of the curve is 1.001.
The intercept of the curve is 0.2.
If the system gives a fault hint, check the standard sample and your inputting,
press any key to return and repeat your performance. (Fig. 17)
ENTER
Any key
Fig. 17
Select Curve
Move the cursor on “ Select Curve” by pressing 【 】 and 【 】 , then press
【ENTER】 to confirm. (Fig. 18)
ENTER
RETURN
Fig. 18
The newly established curve equation will be displayed at the end of the
group. Total 200 curve equations can be saved.
Move the cursor on the equation you need by pressing 【 】 and 【 】 , then
it returns to setting interface after 【
ENTER
】 being pressed. Press 【
RETURN
】
√ √ √ √Standard Curve
○
○ ○ ○Concentration
●
● ● ●Display Curve
○
○ ○ ○Select Curve
0.500A
0
r=0.999 0.8C
C=1.001*A+0.2
√ √ √ √Standard Curve
○
○ ○ ○Concentration
○
○ ○ ○Display Curve
●
● ● ●Select Curve
No. Para
1. C=0.860*A+0.000 *
2. C=0.732*A+0.125
3. C=0.005*A+0.002
√ √ √ √Standard Curve
○
○ ○ ○Concentration
●
● ● ●Display Curve
○
○ ○ ○Select Curve
Establish Wrong！ ！ ！ ！