LABEC V-18 - Manual (Page 26)

16/18 Manual
23
Move the cursor on “ Scroll Paper” by pressing 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 in printer
setting interface followed by 【
ENTER
】. Repeat the operation, till the new
changed paper spread out.
Move the cursor on “ Reset” by pressing 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 in printer setting
interface followed by 【
ENTER
】 , then the printer will be reset.
If you want to check your printer, Move the cursor on “ Reset” by pressing
【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 in printer setting interface, then press 【
ENTER
】 , the printing
content is as follows.(Fig. 46)
Fig. 46
Set Time and Date
Move the cursor on “ Time and Date” by pressing 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 in utility setting
interface, then press 【
ENTER
】 to go into time and date setting interface.(Fig. 47)
ENTER
RETURN
Fig. 47
In the time and date setting interface, press 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 to move the
cursor. You can set them by pressing the numeric keypad followed by
【
ENTER
】 .
The range of year is 0-99, month is 0-12, day is 1-31, hour is 0-24, minute
is 0-59, week is 1-7, other number is invalid.
Get Dark Current
When the ambient circumstance changed, such as temperature, voltage
or the environment lightness, you should get dark current before testing.
Move the cursor on “ Dark Current” by pressing 【∧ ∧ ∧ ∧】 and 【∨ ∨ ∨ ∨】 in utility
setting interface, then press 【
ENTER
】 to get dark current. (Fig. 48)
ENTER
Auto return
…
… … …Getting Dark Current… … … …
√ √ √ √Utility
● ● ● ● Date & Time
○
○ ○ ○ Dark Current
○
○ ○ ○ Reset WL.
√ √ √ √Utility
○ ○ ○ ○Date & Time
●
● ● ● Dark Current
○
○ ○ ○ Reset WL.
Date & Time
Time：
： ： ： 09： ： ： ：18： ： ： ：00
Date: 2005-01-01
Week：
： ： ： Monday
Shanghai
Wavelength
Basic Mode