Leitz Circular sawblades tipped User Manual

Page 12

Advertising
background image

D

eu

ts

ch

En

gl

is

h

日日

本本

語語

Ita

lia

no

Fr

an

ça

is

Es

pa

ño

l

Po

rt

ug

s

Ру

сс

ки

й

12

01/2013 ID.524661 V1.0

When using stacked tooling ensure that the cutting parts are not in contact with each

other.
All clamping surfaces have to be free of dirt, grease, oil or water.
Tighten clamping screws and nuts by using appropriate mounting tool and the

recommended torque.
The extension of wrenches or the use of hammer blows is not permitted!

Use only clamping flanges approved from machine manufacturer, corresponding to design

and producing accuracy of current engineer standards.

Keep to the minimum flange diameter!
Do not use loose spacers and sleeves.

1.4.4

Precautions

Wear safety glasses!

Danger of injuring from parts flying off.

Wear ear protection!

Risk of becoming hard of hearing!

Tools with cracked tool bodies or deformed discs must be scrappedt. Repair or

maintenance not permitted!

Danger of tool breakage.

.Impropper stopping of the sawblade, e.g. by lateral pressing against the blade or

the flange is not permitted.

Damaged tools have to be checked by an expert.

Do not use a deformed tool.

Advertising