Leitz Circular sawblades tipped User Manual

Page 13

Advertising
background image

D

eu

ts

ch

En

gl

is

h

日日

本本

語語

Ita

lia

no

Fr

an

ça

is

Es

pa

ño

l

Po

rt

ug

s

Ру

сс

ки

й

13

01/2013 ID.524661 V1.0

1.5 Cleaning and Maintenance

1 chip area

2 clearance face
For reasons of working safety, the cutting tip / cutting edges (see section “Servicing,

modifying, sharpening”) at the latest have to be serviced when:
- the wear mark width VB on the cutting edges amounts to more than 0,2 mm – pay

special attention to the main wear zones.

- break outs of the cutting edge are visible.
- the power consumption of the machine increases noticably.
Wear safety gloves!

Danger of injury by sharp cutting edges!

The cutting edges have to be regularly cleaned from resin and glue (built-up edges) – this

increases the performance time and the operational safety.

Protect hands and eyes while cleaning.
Wear safety glasses!

Wear safety gloves!

Detergents can irritate skin and eyes and damage the tool or clamping device.

Only use cleaning agents which do not corrode the tool materials, for example Sur-Tec 194

for steel only; Sur-Tec 143 or Avilub METACLEAN 788 for aluminium and steel.

The appropriate detergents and care products can be obtained from the tool manufacturer
Follow the instructions of the detergent manufacturer.

Advertising