Malone MPG353 - Manual

MALONE
R
Stinger Stinger
TM
KAYAK LOADING SYSTEM
Extension Frame Mounting Plate V-Block 70mm Bolts
Installation & Loading Instructions - Please Read Before Beginning
. Insert the two 1” bolts into the two holes
located on the bottom side of the Extension
Frame. Tighten with a Phillips screwdriver.
See image 2.
Step 1: Stinger Pre-Assembly
. Place the V-Block into the channel located directly
behind the Malone logo on the Extension Frame.
See image 1.
1
2
T-knobs
1” Bolts 1 3/4” Bolts
Please Note:
The MPG350 Stinger Kayak Loading System is designed to work with the MPG107M
SeaWing Kayak Carrier. If you have not done so, you will need to purchase
the SeaWing Carrier in order to complete installation.
For installation with the MPG107 SeaWing (installation mounting bolts are standard
thread and are inserted from the bottom), please follow alternative instructions
(in panels - marked MPG107 SeaWing) under steps 7,8,9 and 10.