Malone MPG331 User Manual

Malone, Fs rack storage system

Advertising
background image

MALONE

R

Installation Instructions - Please Read Before Beginning

Warnings / Limitations: Do not exceed the published load bearing weight of the product.

Use on a flat dry surface. Under no circumstances will the manufacturer be responsible for

damages or failures that occur as a result of improper assembly or usage.

FS Rack Storage System

(MPG318 - MPG331 - MPG332)

FS Rack Storage System

(MPG318 - MPG331 - MPG332)

Lower Upright (2)

Frame Leg (2)

Cross Support (5)

Top Upright (2)

Upright Brace (4)

Coupling (2)

Assembly Hardware

Bolt, 45mm

I

Bolt, 50mm

J

A

B

C

D

E

F

Leveler (6)

G

H

. Align Lower Upright (C), Frame Leg (A) and Upright

Brace (D) mounting holes. Install and firmly tighten

45mm Bolts (I) and the 50mm Bolts (J). Install and

fully insert Levelers (G). See image 3.

. Repeat Steps 2 and 3 to assemble the second lower

side assembly.

NOTE: If optional Casters or Leg Extensions are to

be installed, see instructions included with product.

Step 1: Vehicle Installation

. Open the carton, remove the contents and confirm

that all the components of the rack have been

included. See image 1.

2

A

E

E

D

D

C

See Image 3

for Bolt

Installation

G

. Identify and pre-stage the following parts for

building a lower side assembly.

See image 2.

1

3

G

I

I

I

I

J

J = 50mm Bolts

I = 45mm Bolts

Advertising
This manual is related to the following products: