Cisco WVC80N - Manual (Page 23)

Chapter 3
Advanced Configuration with the Web-based Utility
22 Wireless-N Internet Home Monitoring Camera
Log
System Log This shows the Camera’s activities. To empty
the log, click Clear Log.
To get the Camera’s most up-to-date information, click
Refresh. To get additional information about the screen’s
features, click Help.
Help
Through the Help screen, you’ll find links to additional
resources for the Camera and its Utility. If you select the
Help tab directly from the Welcome screen, then you will
see the User Help screen and will only be able to access
these resources. If you first log in to access the Camera’s
Setup and then select the Help tab, you will see the
Administrator Help screen and will be able to restore
factory defaults and upgrade the Camera’s firmware.
Setup > Help
• Setup Click any of the topics in the bar on the left to
get help information.
• Linksys Support Page - Download Latest Viewer/
Recorder Utility Click this link to download the most
recent version of the Camera Utility from the Linksys
website, www.linksysbycisco.com.
• Click here to learn how to configure Port Forwarding
in your Linksys Router If you are going to use the
DDNS Service, you need to set up port forwarding
on your router. For instructions on how to configure
a Linksys router, click this link. If you have a different
router, refer to your router’s documentation.
• Adobe website (software for viewing PDF
documents) If you do not have Adobe Acrobat
Reader, click this link to download it.