Using the ac power supply to charge the battery – Cisco Cisco Unified Wireless IP Phone 7925G User Manual

Page 19

Advertising
background image

Connecting Your Phone

Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0

11

Note

You can also charge your battery by using a desktop charger or multi-charger. For more
information, see the

Cisco Unified Wireless IP Phone 7925G Accessory Guide

.

Using the AC Power Supply to Charge the Battery

You can charge your battery quickly by connecting the AC power supply to the phone. To
accommodate different AC power receptacles, you must insert the appropriate AC plug adapter on the
AC power supply.

You can use the phone while the battery is being charged. After the battery is charged, you can unplug
the power supply cord, or you can leave the phone plugged into the power cord.

Note

Depending on configuration, your phone may automatically power off when it is connected
to an AC power source. AC power sources include the power supply, desktop charger, or
multi-charger. If the phone is in use (during a call or is using an XML phone service) when it
is connected to the AC power source, it will power off upon termination of the call or phone
service.


For more information, ask your system administrator.

Battery Type

Charging Time if AC Power
Supply Connected to Phone

Charging Time if Phone Connected
to USB Port on PC with USB Cable

Standard

2 hours

5 hours

Extended

3 hours

7 hours

Advertising