Cisco Cisco Unified Wireless IP Phone 7925G - Manual (Page 18)

10 OL-16132-01
To replace the phone cover, follow the steps in the graphic below:
Charging the Phone Battery
You can charge the battery in your wireless IP phone by connecting the AC power supply or the USB
cable to your phone. For more information, see these sections:
• Using the AC Power Supply to Charge the Battery, page 11
• Using the USB Cable and USB Port on the PC to Charge the Battery, page 13
1 Align locking catches at the bottom of the cover to the notches on the phone.
2 Press the cover firmly against the phone until it clicks in place.
187527
2
CISCO
1