Neu-F NF.6501 - Manual

neuf • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
www.neu-f.com
AIR INTAKE KIT
2012-14 Fiat 500 Abarth
PART # NF.6501
INSTALLATION INSTRUCTIONS
PART LIST: 1 – Silicone Hose 1 – Aluminum Intake Tube 1 – Air Filter
2 - #32 hose Clamp 2 – Vent Line Connector 1 – M6 x 40mm Flange Bolt
2 – Wire Tie 1 – 15” x ½” Hose 1 – Vinyl Cap
1- Plastic Union
TOOLS REQUIRED: 1 – 10 mm Socket 1 – 8mm Nut Driver 1 – Screwdriver
1 – Spring Clamp Pliers
1. Disconnect the (2) vent lines attached to the
turbo inlet pipe.
2. Loosen hose clamps at turbo and air filter box
then remove turbo inlet pipe.
3. Using a screwdriver disconnect inlet duct from
air filter box.
4. Lift air filter box off rubber mounts to remove.
5. Disconnect valve cover breather hose.
6. Install the (2) vent line fittings and hose clamp
onto silicone hose then attach to turbo.
7. Using 10 mm socket, unbolt oil filler support
bracket.
8. Install hose clamp onto silicone hose, insert
supplied intake pipe into hose then mount on
top of oil filler support bracket using supplied
M10x40mm bolt.