New England Arbors VA80250 User Manual

The 5x5 professional post extension kit, Assembly instructions, Step one step t wo

Advertising
background image

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept.
at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

1. 5 x 5 x 30” Post Extensions (4)
2.
#8 x 1 1/2“ Stainless Steel Screws (32)
3.
Vinyl Weld (1)

Tools You Will Need

• Cordless Drill

General Information

Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling components.

The 5x5 Professional Post Extension Kit

Please read through before starting assembly.


ASSEMBLY INSTRUCTIONS

1

1

2

(Designed to be used with any New England Arbor with 5x5 Posts)

Not to Scale

30

5

4

8

2.5

3

VinylWeld

Glue all four sides of the joiner

(60 second cure time).


STEP ONE

STEP T WO

Slide the joiner of the 5x5 extension

into the arbor posts.



1915 Dove St., Port Huron MI USA 48060

Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286

www.newenglandarbors.com

VinylWeld

STEP THREE

Screw all four sides of the arbor posts

with 2 screws per side (repeat for all posts).


*

Once arbor installation is complete, the extension

joint should be buried 1" to 3" (depending on the

arbor it is being used with), below earth grade.

*

Advertising