Cres Cor CSH-122-10 Series User Manual

Cres Cor Control panel

Advertising
background image

5925 Heisley Road • Mentor, OH 44060-1833

Carving

Station

FL-2206

Rev. 7 (4/08)

Page 1 of 2

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

OPERATING and MAINTENANCE INSTRUCTIONS

Model: CSH-122-10 Series, 120 and 240 Volt

ELECTRICAL SPECIFICATIONS:

Model No.

Volts

Watts

Amps

Hertz

Phase

NEMA

Service

CSH-122-10

120

1100

9.2

60

1

5-15

15 AMP

CSH-122-10

240

1150

4.8

60

1

6-15

15 AMP

HOW TO OPERATE UNIT:

Plug cord into proper wall outlet.

1.

Push thermostat switch

2.

“ON” and turn thermostat

to no. 10.
Preheat for 30 minutes; then add cutting board

3.

and/or pans to the heated base.
Push lamp switch(es) to

4.

“ON” for additional

heat.

NOTE: Proper food holding temperature is 140°F

(60°C) or higher.

For uncovered pans or product:
Leave thermostat on no. 10 setting.

For covered pans or product:
Turn the thermostat to no. 6 setting.

5. Push switches and turn thermostat “OFF” when

done.

CLEANING INSTRUCTIONS:

Remove power cord from wall outlet.

1.

DO NOT immerse unit in water.

2.

DO NOT get water on controls.

3.

Wipe cooled exterior with soap and water.

4.

DO NOT use abrasives or harsh

5.

chemicals.

REPLACEMENT PARTS:

Lamp, Red (250 Watts) ................................ 0820-001

Lamp, White (250 Watts) ............................. 0820-033

Lamp, Red (275 Watts/240 Volts) ................ 0820-014

Cutting Board ............................................... 1004-018

Legs - Adjustable ......................................... 1206-027

Socket ........................................................... 0822-037

THERMOSTAT KNOB

HOOD "ON/OFF"

THERMOSTAT BEZEL

HEATERS "ON/OFF"

0595-002

0848-063

3

2

1

8

4

5

6

7

OFF

10

9

Advertising