Oakworks Accessory Storage - Manual

Wooden Models without an arm rest shelf (Fig. 1)
Applicable for tables with two standard end panels
and for tables with one access end panel
• Separate the Face Crescent Pad from the Face Rest. Insert the
Face Rest Platform half way thru the elastic strip attached to the
plywood top of the table (as shown in Fig. 1).
• Place the Face Rest Crescent on the Hook and Loop fasteners closest
to the hinge side of the table.
Metal Models (except Advanta) (Fig. 4)
• Separate the Face Crescent Pad from the Face Rest. Insert
the legs of the Face Rest Platform thru the elastic strip attached
to the plywood top of the table. Fold the Platform back on itself
and secure the cam locks. (as shown in Fig. 4).
• Place the Face Crescent pad on the Hook and Loop
fasteners closest to the hinge side of the table (as shown in Fig. 4).
Advanta (Fig. 5)
• Separate the Face Crescent Pad from the Face Rest. Insert
the legs of the Face Rest Platform thru the elastic strip attached
to the plywood top of the table. Fold the Platform back on itself
and secure the cam locks. (as shown in Fig. 5).
• The face rest crescent will not fit in the Advanta for storage.
We suggest using the pocket on your carry case for storage.
Fig. 1
Accessory Storage Instructions
For all Wooden & Metal Portable Tables
Phone: 717.235.6807
FAX: 717-235-6798
www.oakworks.com
Wooden Models with an arm rest shelf (Fig. 2 & 3)
Applicable for tables with two standard end panels
and for tables with one access end panel
• Separate the Face Crescent Pad from the Face
Rest. Insert the Face Rest Platform half way thru
the elastic strip attached to the plywood top of the
table (as shown in Fig. 2).
• Place the Face Rest Crescent on the Hook and Loop
fasteners closest to the hinge side of the table
(as shown in Fig. 3).
Fig. 2 Fig. 3
Fig. 4
Fig. 5
PN 6482 rev. 0807