CyberPower Systems CPS150SI - Manual

Spring
Decorative Ring
Contact Pin
Contact Retainer 15 ampFuse
12V DC Adapter
150 Watt AC Mobile Power Inverter
User Guide
CPS150SI
This guide contains important information regarding the safety, operation, maintenance, and
storage of this product. Failure to read this guide and follow the directions could result in
injury and/or property damage.
Table of Contents
Operating and Storage Tips
Specifications
Troubleshooting
DC Fuse Replacement (For Cigar Plug)
Product Limited Warranty
Important Safety Information
Introduction
Package Contents
Product Features (Model CPS150SI)
Product Features (Model CPS150SI) - continued
Operation
Important Safety Information.............................................................. 03
Introduction................................................................................................ 04
Package Contents..................................................................................... 04
Product Features....................................................................................... 05
Operation..................................................................................................... 06
Operating and Storage Tips.................................................................. 07
Specifications.............................................................................................. 08
Troubleshooting........................................................................................ 08
DC Fuse Replacement............................................................................. 10
Product Limited Warranty...................................................................... 11
Before installing and using the CyberPower CPS150SI Mobile Power Inverter
please read and follow these safety instructions.
Thank you for choosing the CyberPower CPS150SI AC Mobile Power Inverter. To
enjoy all the features and benefits of CPS150SI, please read and follow all
instructions completely.
The CyberPower CPS150SI AC Mobile Power Inverter is a plug-and-play, portable
source of 110/120 volt AC power. The AC Mobile Power converts DC battery
power from your vehicle into standard 110/120 volt AC power, allowing you to
power most notebook computers, cell phone chargers, camcorders, and other
electronic products drawing 150 watts or less of AC power.
Operating Tips
The CPS150SI inverter should only be operated under the following conditions:
Dry - Do not allow water or other liquids to come into contact with the
inverter.
Temperature - Ambient air temperature should be between 32 o F - 86 o F
(0 o C - 30 o C). Keep the inverter out of direct sunlight.
Air Circulation - Keep the inverter's ventilation slots clear to ensure
free air flow to the unit. Do not place any items on or over the inverter
during operation. The unit will shut down if it overheats.
The CPS150SI contains a fuse inside in the lighter adapter (see Figure 2) to
protect the unit against overloading. If the inverter draws more than 150 watts,
the internal fuse may open to protect the inverter, vehicle battery, and the
connected equipment. To replace the fuse, please follow the instructions below:
1. Unplug the inverter from the power source.
2. Remove the contact retainer from the 12V DC adapter.
3. Replace the 15 amp fuse.
4. Reassemble the fuse, contact pin, and contact screw carefully.
5. Ensure all pieces shown in Figure 2 are installed in the correct sequence.
* Note: For in-warranty units, the replacement fuse can be obtained from CyberPower Technical Support.
CyberPower warrants the CPS150SI ("Inverter") to be free from defect in material or manufacture for
two years. If a defect results in product failure during its normal use, CyberPower's sole
responsibility is to repair or replace (as its sole option) the Inverter.
The foregoing Limited Warranty is the consumer's sole and exclusive remedy and excludes any
incidental or consequential damages. Some States do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above limitations or exclusions may not
apply to you (the Consumer). This limited warranty gives the Consumer specific legal rights and the
Consumer may have other rights, which vary from State to State.
To make a Limited Warranty claim:
1. Pack and ship the Inverter to CyberPower at 5555 12th Ave. E., Suite 110, Shakopee, MN 55379.
2. Clearly indicate on the outside of the packaging that this is a "WARRANTY RETURN"
3. Clearly include your name and address (a) on the outside packaging and (b) on a sheet of paper
enclosed in the box with the Inverter that is being returned.
4. You MUST prepay all shipping costs and you are responsible for packaging and shipment for the
return of the defective product.
Cyber Power Systems (USA), Inc.
5555 12th Avenue East, Suite 110, Shakopee, MN 55379, U.S.A.
TEL: (952) 403-9500 FAX: (952) 403-0009 Toll-Free: (877) 297-6937
E-mail: [email protected] Web: www.cyberpowersystems.com
Entire contents copyright C 2007 Cyber Power Systems, Inc.
All rights reserved. Reproduction in whole or in part without permission is prohibited.
1. 12 volt input socket
2. USB charging port
3. LED indicator light
4. Cooling Fan
5. 120 volt AC outlet
1. Remove the cigarette lighter from the automobile lighter socket and insert the CPS150SI
into your vehicle's lighter socket.
2. Verify that the product draws less than 150 watts and plug it into the CPS150SI.
3. Please make sure the unit is firmly plugged into your vehicle's lighter socket for proper
operation. You may rotate the plug to make sure there is good contact.
4. An LED light indicates the CPS150SI is operational.
5. To avoid discharging the battery, always remove the CPS150SI plug from the lighter
socket in your vehicle when not in use.
Do not operate the CPS150SI near flammable materials, fumes, or gases.
Always use the inverter where there is adequate ventilation. Do not
obstruct the ventilation slots.
Never immerse the unit in water.
Proper cooling is essential when operating the inverter. Refrain from
placing the inverter near the vehicle's heat vent or in direct sunlight.
Always turn the inverter off by removing it from the DC accessory socket
when not in use.
Check the warning labels on battery chargers or adapters before
connecting them to the inverter. Do not connect battery chargers or
adapters with warnings about using with inverters.
This package includes:
AC Mobile Power Inverter
Warranty Registration Card
User Guide
Figure 1. Product Features
Storage Tips
Proper storage temperature range is 50 o F - 85 o F (10 o C - 28 o C)
Please store and use the inverter in a cool and dry place.
Avoid exposing the inverter to heating elements, direct sunlight or high
humidity.
Output Max Power Max 150 Watts
Output Continuous Power 120 Watts
Output Voltage
120 Volts +/- 10%
Output Frequency 60 Hz
Output Waveform Simulated Sine Wave
Input Voltage 10.8 to 15.8 volts
Low Voltage Shutdown 10.5 volt
Problem
No AC output power
(Power indicator is not
illuminated) Poor contact with lighter socket.
Automotive electrical system
requires ignition to be on.
Car's lighter socket fuse is blown.
Over-heating.
Vehicle's battery voltage is
below 10.8 volts.
Your vehicle's battery input
voltage is below 10.8 volt.
Vehicle's battery input voltage is
higher than 15.8 volt.
Inverter is overloaded.
Ensure the inverter adapter is securely
plugged into vehicle's lighter socket.
Replace the lighter socket if necessary.
Turn the vehicle ignition key to the
"Accessory" position.
Check the vehicle fuse panel and
replace the damaged fuse.
Allow inverter to cool down. Ensure
that there is adequate ventilation
around the unit and load is no more
than120 watts for continuous
operation.
Unplug the inverter and start the
vehicle to charge the battery.
Check vehicle's battery and verify it is fully
charged. Change vehicle's battery if
necessary.
Check your vehicle's user guide for
troubleshooting.
Reduce the connected equipment to 150
watts or less.
Suggested Solutions Possible Cause
Short/Long Beep
Figure 2. Fuse Replacement
K01-0000029-00
11
10
9
5
6
4
3
8
7
1
2
3
5
4