Chamberlain RWA300R - Manual

Carton Inventory
Overview
The Alert uses a Passive Infra-Red sensor to detect
movement of people and vehicles, while allowing
small animals to pass through undetected.
Model RWA300R
Wireless Pedestrian & Vehicle Alert
Base Station Passive Infra-Red (PIR)
Motion Sensor
1
Swivel Bushing
Mounting Plate
AC Adapter
Rubber Pads
Sun/Rain Shield
®
Operation & Features
Relay Output
Contacts
AC Adapter
Base Station Switch #1
Base Station Switch #2
Learn Button
Antenna
Mute/Off
Button
Base Station
Battery: The AA batteries (not provided) in the PIR
Motion Sensor will last up to 2 years depending on
use (Lithium batteries recommended for colder
environments). If Base Station battery (optional) is
low, it will beep every few minutes. Replace with
9-Volt battery (not provided). For peak performance
inspect batteries annually and replace as needed.
Base Station Switches:
Switch #1:
Switch #2:
Programming Additional PIR Motion Sensors: The
Base Station can learn the code of up to 3 additional
PIR Motion Sensors, responding with unique buzzes.
To program additional PIR Motion Sensors see
Step 6.
To order additional PIR Motion Sensors call
1-800-528-9131.
Clear Memory: Press and hold the Learn Button on
the Base Station until 3 beeps are heard.
On/Off: To turn Base Station off hold down the Mute
Button until it powers down. The Base Station can be
turned on by pressing the Mute Button.
Mute: Press and release the Mute Button to put the
Base Station into Sleep Mode for one hour. After an
hour it will activate automatically.
1 2 ON
OFF
OFF Buzzer Off
ON Buzzer On (Default)
OFF Long Buzz
ON Short Buzz (Default)
To prevent possible SERIOUS INJURY or DEATH from
electrocution, outputs are suitable ONLY for controlling low
voltage devices, 24V max, ac or dc.