OFM 66746 - Manual

Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this table as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Models 66745 / 66746
Mesa Series Mobile Utility Tables
Parts Listing
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
[email protected]
01.15.2014
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1: Align Table Top (A) with the holes on top of the Mobile Table (B).
Attach by inserting 6x16mm Screws (C) up through the underside
of the Mobile Table (B) top and into the Table Top (A).
Tighten using screwdriver.
A
Table Top
1 Unit
C
6x16mm Screw
4 Units
B
Mobile Table
(With or Without Doors)
1 Unit
66745
66746
1
A
B
C