OmniSistem WiDMX Transceiver - Manual (Page 10)

SET
This procedure allows to change between TRANSMITTER -
RECEIVER - EXTENDER - BACKUP mode of operation .
-Power down the Wi DMX.
-While holding down SET key (Fig.2), Power up the Wi DMX.
REGARDLESS OF THE MODE, YOU MUST EXECUTE THE PAIRING OPERATIONS
EXPLAINED IN THE RELATIVE CHAPTERS OF THIS MANUAL
The W Wii D DM MX X factory default mode is T TR RA AN NS SM MIIT TT TE ER R
On display appears as in (Fig.3).
Use UP/DOWN keys to change operating
mode.
Confirm with SET key (Fig.2).
Fig. 2
3.1 SETTING OF THE OPERATING MODE
The connection must be like in (Fig.4)
W Wii D DM MX X analyzes the D DM MX X 5 51 12 2 signal as soon as the
XLR connector is inserted and shows the number of
channels generated from the controller (Fig.5);
in absence of signal the display appears like in (Fig.6).
This operation mode allows you to transmit the DMX 512 signal coming from a con-
troller to the paired receivers, through two channels of transmission.
4.1 TRANSMITTER MODE
CFG
:
TRANSMITTER
Fig. 3
dmx
:
512ch, 40hz
Fig. 5
dmx
:
<<no data>>
Fig. 6
1 5
3
4 2
1 5
3
4 2
DMX coming
from controller
DMX to other
projectors
Fig. 4