OmniSistem WiDMX Transceiver - Manual (Page 9)

2.3 INPUT CONNECTION FOR POWER SUPPLY
2.4 CONNECTION OF THE AC-ADAPTER TO THE MAIN AC
Plug the connector of the ac-adapter completly in the power input
To disconnect it, extract gently.
ATTENTION: do not use ac-adapters different from the one supplied, it
could cause serious damages at the internal circuitation.
4
MAKE SURE THAT VOLTAGE AND POWER FREQUENCY CORRESPOND TO
WHAT IS REPORTED ON THE AC ADAPTER PLATE.
The supplied ac-adapter has a plug, therefore you should only plug it in the
socket.
When Wi DMX is powered, on display
appears as in (Fig.1),if this condition is not
true, please check if there is power in the
electric socket or check the connection
between ac-adapter/controller and ac-adapter/electric socket.
If the problem persist, please consult your dealer.
4
WIRELESS
Fig. 1
N
ext