Dx-coded film, Check points, I?5 fs.5 – Nikon n65 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

i?5 fS.5

j e a i d

Gently close the camera back until the
camera back snaps closed. Film

automatically advances to the first frame.

• When t appears on the LCD panel, the film has

advanced to the first frame.

•When Err and E in the LCD panel and Err in z

viewfinder blink, fiim is not properly installed. Open 2
the camera back again and reload film.

<

• Frame number display remains when the power <

switch is off.

2i

IT

a

DX-coded film

With DX-coded film, film speed will be set

automatically between ISO 25 to ISO 5000.

Film speed is set to ISO 100 with non-DX-

coded film.

Check points

>

Avoid direct sunlight when changing film outdoors.

>

You can check the number of available exposures on the film roll and film

speed through the film confirmation window.

• Infrared films cannot be used with this camera since an infrared sensor is used

for the detection of the film frame position.

21

Advertising
This manual is related to the following products: