Ing built-in speedlight – Nikon n65 User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^^ing Built-In Speedlight
This section explains how to use the built-in Speedlight set to desired
flash sync mode when a D- or G-type AF Nikkor lens is attached.
In P, S, A or M
exposure mode
In or Vari-Program
1
In Auto-Multi Program, Shutter-Priority
Auto, Aperture-Priority Auto or Manual
exposure mode, release the built-in
Speedlight by pressing the 0 flash lock
release button.
• When the subject is dark or backlit and shutter
release button is lightly pressed, the flash
recommended indication V blinks in the viewfinder
in Auto-Multi Program, Shutter-Priority Auto,
Aperture-Priority Auto or Manual exposure mode.
• In
iSS
(AUTO mode) or Vari-Program, when the
subject is dark or backlit (except in H or -^Q
i
) and
the shutter release button is lightly pressed, AUTO
% appears in the LCD panel and the built-in
Speedlight automatically pops up.
• When the Speedlight is ready to fire, H appears
without blinking in the viewfinder (when the
camera’s meter is on).
• Press the Speedlight down gently until it clicks into
place to retract it.
Set the flash sync mode by rotating the
Command Dial while pressing the
0
flash
sync button.
> Matrix Balanced Fill-Flash is selected in exposure
modes other than Manual, and Standard TTL
Flash is selected for Manual exposure mode. See
page 76 for details.
• See the table on pages 83 and 86 for shutter speed
and aperture, available sync mode in each
exposure mode.