Crosley Radio Crosley Jukebox CR11 User Manual

Important safety instruction, Model: cr11, Warning

Advertising
background image

SPECIFICATION

FREQUENCY RANGE

: FM 87.5 - 108.5 MHz

AM 525 - 1710 KHz

POWER CONSUMPTION

: 25W

POWER SOURCE

: AC 120 V / 60 Hz

ANTENNAS

: External antenna for FM

Built-in ferrite bar for AM

SPEAKER

: 4" dynamic type

TAPE SPEED

: 4.75 cm / sec.

WOW and FLUTTER

: 0.35% JLS. WTD.

* DESIGN AND SPECIFICATION SUBJECT TO CHANGE WITHOUT

NOTICE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

AC

Polarized Plug

IMPORTANT SAFETY

INSTRUCTION

PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT

SAFEGUARDS

THAT ARE APPLICABLE TO YOUR EQUIPMENT

1. Read Instructions - All the safety and operating instructions should be read

before the product is operated.

2. Retain instructions - The safety and operating instructions should be retained

for future reference.

3. Heed Warnings - All warnings on the product and in the operating Instructions

should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments - Do not use attachments not recommended by the product

manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this product near water - for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near

a swimming pool; and the like.

8. A product and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the product and cart

combination to overturn.

9. Ventilation - Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the product and to protect it from overheating, and

these openings must not be blocked or covered, The

openings should never be blocked by placing the product

on a bed, sofa, rug, or other similar surface. This product

should not be placed in a built - in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources - This product should be operated only from the type of power

source indicated on the marking label, if you are not sure of the type of power

supply to your home. Consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the

operating instructions.

11. Grounding or Polarization - This product may be equipped with a polarized

alternating-current line plug (a plug having one blade wider than the other). This

plug will fit into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet try reversing the

plug, If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

12. Power - Cord Protection - Power - supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the point where they

exit from the product.

13. Lightning - For added protection for this product during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power - line surges.

14. Power Lines - An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits

as contact with them might be fatal.

15. Overloading - Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

16. Object and Liquid Entry - Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short - out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

17. Servicing - Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

18. Damage Requiring Service - Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions;

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as

an improper adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the product to its

normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance - this indicates

a need for service.

19. Replacement Parts - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have

the same characteristics as the original part. Unauthorized substitutions may

result in fire, electric shock, or other hazards.

20. Safety Check - Upon completion of any service or repairs to this product, ask

the service technician to perform safety checks to determine that the product

is in proper operating condition.

21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling

only as recommended by the manufacturer.

22. Heat - The product should be situated away from heat sources such as radiators.

Heat registers, stoves, or other products(including amplifiers) that produce heat.

WARNING: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful intereference to radio

or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:
-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an circuit different from that to which the receiver

is connected.

-

Consult the dealer or an experienced radio TV technician for help.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

910-986000-013

Model: CR11

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an equilateral

triangle, is intended to alert user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be

of sufficient magnitude to constitute risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended

to alert user to the presence of important operating and

maintenance (servicing) instruction in the literature accompanying

the appliance.

Advertising