Initial setup – Canon VB-C10R User Manual

Page 33

Advertising
background image

3-3

Setup Pr

ocedures

Initial Setup

1. Turn on the PC’s power switch.

The AC adapter must not yet be connected to the VB-C10/VB-C10R at this stage.

4. The VB-C10/VB-C10R’s MAC address and the currently set IP address are

displayed in the “VB-C10/VB-C10R IP Installer” dialog box.

Select a MAC address by clicking on it, then click the “Setup IP Address...” button.

Tip

● The MAC address for this unit is shown on the bottom of the VB-C10/VB-C10R

(

→ P.1-11).

● The IP address 192.168.100.1 is used as the factory default setting. Please set an

IP address that suits the environment in which the VB-C10/VB-C10R is to be used.

● Internet Explorer 4.01 or later is required for the IP Installer operating environment.

2. Insert the CD-ROM that was supplied with the VB-C10/VB-C10R into the PC’s

CD-ROM drive, and start up the “VBIPI.exe” program as follows:

1 Double-click My Computer on the desktop.

When using Windows XP, click on the “Start” button, then click “My Computer”.

2 When the CD-ROM icon appears, double-click this icon, then double-click “VBIPI.exe”.

3. When the “VB-C10/VB-C10R IP Installer” dialog box appears, connect the AC

adapter to the VB-C10/VB-C10R and turn on the power.

See “Turning the Power ON and OFF” (

→ P.2-4) for how to turn on power to the VB-C10/VB-

C10R.

Advertising