Canon VB-C10R - Manual (Page 72)

4-20
Setting Presets
Presets can be set in one of two ways. Use the method that suits your environment or taste.
1: Retrieving values from Admin Viewer and changing settings
○ ○ ○ ○ ○ ○
To Make Settings...
Start up Admin Viewer and set the shooting angle of the VB-C10/VB-C10R as a preset.
1 From the Preset Selection box, select the preset
to be set, and enter the Preset Name.
Click the “Admin Viewer” button to start it up.
Preset Setting Tool
2 Use Admin Viewer to move the camera angle to
the position you want to set preset angle, then click
the “Get Value” button.
Preset set can be checked in the Preset Values Entry box,
or with the Preset Preview frame.
3 Click the “Send” button.
Check the Status List to be sure the values were sent
correctly. Then when the “Reflect set values” button is
clicked, the values will be reflected in the VB-C10/VB-C10R.