Cisco CRS-1 - Manual (Page 51)

4-3
Cisco CRS Carrier Routing System 8-Slot Line Card Chassis Site Planning Guide
OL-5802-09
Chapter 4 Site Planning Considerations
Equipment Rack Considerations
• Scissors
• Tape measure (optional)
Equipment Rack Considerations
A fully loaded Cisco CRS 8-slot LCC weighs 650 lb (294.8 kg). The chassis is mounted in a four-post
rack, as shown in
Figure 4-1 .
To ensure safe installation and operation of the routing system, you must install the chassis in a four-post
equipment rack that meets the specifications described in the
“Equipment Rack Specifications” section
on page 3-4 .
Figure 4-1 8-Slot LIne Card Chassis Mounted in an Equipment Rack
Warning The chassis should be mounted on a rack that is permanently affixed to the building. Statement 1049
1 Equipment rack 3 Vertical mounting brackets
2 8-slot line card chassis
122781
CISCO CRS-1 SERIES LINECARD CH ASSIS
1
2
3
4