Reverse feature, Auto-speed feature, Saver feature – Casablanca Metropolitan User Manual

Page 15: Winter feature, Security feature, Comfort•touch ♦ auto-speed feature, Comfort•touch ♦ saver feature, Comfort•touch ♦ security feature, Comfort•touch ♦ winter feature, Comfort•touch ♦ reverse feature

Advertising
background image

14

Pressing the

REVERSE

button will change the direction of rotation. An audio tone signals

the beginning of the reverse sequence and you will see the airflow direction arrow
changing. The fan gradually slows to a stop, then reverses direction.

REVERSE

COMFORT•TOUCH AUTO-SPEED FEATURE

In the Auto Speed mode, fan speed changes in response to changes in room tempera-
ture. Push the

AUTO

button to start. The words 'AUTO SPEED' show on the display. Set

the fan speed to the speed at which you are most comfortable. Once set, the fan will
increase or decrease by one speed for each 1.5

°

F increase or decrease in temperature.

If temperature decreases enough to turn the fan OFF, the Auto Speed indicator will
flash slowly to remind you that the fan will turn on when the temperature increases.

Temperature Accuracy

±

3

°

F

COMFORT•TOUCH SAVER FEATURE

The Saver mode will automatically turn lights off 1 hour after the
lights are turned on. Press the

SAVER

button and 'SAVER' will appear in

the display. An audio tone will warn you 20 seconds before the pro-
gram is going to turn the lights off. Press the

SAVER

button again to

cancel.

AUTO

SECURITY

WINTER

TEST

SAVER

REVERSE

SECURITY

SECURITY

6
5
4
3
2
1

AUTO-SPEED:
SECURITY:
REVERSE:
SAVER:
TEST:
WINTER:

Thermostatic fan speed control
Lights ON and OFF automatically
Change airflow up or down
Lights turn OFF after 1 hour
Tests all fan and light functions
Draft-free heat recirculation

Replace batteries when “Lo” is displayed

Pressing the

SECURITY

button will start the Security lighting pro-

gram. The controller beeps and indicates 'SECURITY'. The light
will automatically turn ON and OFF in a seemingly random man-
ner over an eight and a quarter hour programmed cycle that is
designed to give the home a "lived-in" look.
Regardless of the light setting when switching to the Security
mode (lights on or off, dim or bright), the lights will increase
to high brightness and then begin the Security cycle. This cycle
is then repeated continuously until cancelled by pressing the

SECURITY

button.

At any time during the Security mode you may adjust the fan
speed, reverse the direction, operate in Auto Speed or Winter,
use Saver or run the Test mode without affecting Security mode.

You may still turn the light ON and OFF (or OFF and ON) manu-
ally for temporary lighting, but the light will continue to operate
automatically at its programmed times.

SECURITY MODE CYCLE

COMFORT•TOUCH SECURITY FEATURE

1. On for 30 minutes (80% bright)
2. Off for 30 minutes
3. On for 120 minutes (50% bright)
4. Off for 60 minutes

5. On for 60 minutes (100% bright)
6. Off for 120 minutes
7. On for 15 minutes (20% bright)
8. Off for 60 minutes

COMFORT•TOUCH WINTER FEATURE

The Winter mode provides draft-free recirculation of heated air. Press

WINTER

to activate, and the word 'WINTER' is indicated. This puts the

fan in the upward airflow direction at the fan's lowest speed. Every ten
minutes the fan will increase to speed 3 for ten seconds before return-
ing to the lowest speed.

Pressing any button on the remote will cancel the

'Winter' mode; except using the light functions.

SAVER

AUTO SPEED

SECURITY

WINTER

COMFORT•TOUCH REVERSE FEATURE

Note: This function does not operate if the fan is not running.

Note: The temperature displayed is from an electronic thermometer
built into the remote control that reads room temperature. It is not
a thermostat that controls the room temperature.

To cancel Auto Speed, simply push the

AUTO

button again.

Selecting

WINTER

also cancels Auto Speed.

R

Advertising