Casablanca Metropolitan - Manual (Page 8)

7
INSTALLING THE SWITCH HOUSING CAP
Step 11. Line up the
three threaded holes in
the rim of the switch
housing with the three
clearance holes in the
mounting plate. Carefully
slide the switch housing
into the mount so that
the threaded holes are
directly behind the clear-
ance holes.
Step 12. Install the
three screws removed in
Step 10.
Tighten securely by hand
only.
PROCEED TO YOUR FAN’S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS:
INTELI•TOUCH = PAGE 8 COMFORT•TOUCH = PAGE 12
Step 10. Remove the three screws on
the mounting plate.
Set aside for Step 12.
PREPARING TO INSTALL SWITCH HOUSING CAP
MOUNTING
PLATE
SCREWS
(3)
M
ETROPOLITAN
™