Clarion VMA5894 - Manual (Page 8)

8 VMA5894 and VMA7194
Wireless headphones
Power OFF ON turns the headphones power on and off.
CH.A and CH.B select the infrared channel if you have two
monitors and two video source units (Configuration 2).
Configuration 1 Configuration 2
You don’t need to select the IR channel if you have only one
one monitor or two monitors and only one video source
(Configuration 1—both monitors play the same video or
game).
Volume adjusts the audio volume.
Battery compartment requires two AAA 1.5 volt batteries (not
included)
Playing a video or game
The monitor is preset at the factory to turn on automatically
when you start your car’s ignition. The monitor remains dark
until it detects a video signal.
1. Insert the media (tape, cartridge, game or disc) into the
video source.
2. Turn on the headphones.
If this is the first time you’ve used the unit, make sure your
headphones have fresh batteries installed.
Note
Your headphones must be in view of the monitor for the
infrared transmission to work.
3. Press play on the video source.
4. When you see the picture, press WIDE to select the display
mode. Depending on the video source:
CINEMA may stretch the image to fill the entire screen.
ZOOM may bring the image slightly closer.
NORMAL displays the image at its true aspect ratio (4:3)
Video source Video source Video source
Monitor Monitor Monitor Monitor
IR CH A IR CH A IR CH A IR CH B