Time based features – Clarion RPNP Plug and Play Receiver User Manual

Page 26

Advertising
background image

SIRPNP

25

Time Based Features

The SIRIUS signal maintains the current time and
can trigger pre-programmed alarms.

Once you turn the power on and the unit receives
the satellite signal, the unit automatically maintains
the time unless you remove it from its docking base.

If the receiver loses the signal, it loses the time and
will not trigger any pre-programmed alarms. To
restore the time and alarms, turn the receiver on. It
will update the time automatically from the satellite
signal.

Clock

This option sets the time on the clock that appears
on the default display based on your chosen format,
the time zone, and daylight savings time.

Format: determines the style of display: 12 Hour

(default) or 24 Hour.

Time Zone: selects the time zone based on

Greenwich Mean Time (GMT).

DST (Daylight Savings Time): indicates whether

daylight savings time is observed in your
current location or not. Your settings are:
DST Observed or DST Not Observed.

Alarm Clock

This option turns the Plug and Play receiver on at a
specific time. Press any button on the front panel.

When the unit turns on it plays the stream you
selected last.

Set Alarm: provides the settings: Alarm On or Alarm

Off (default).

When the alarm is on, the time appears on
the default display in reverse image.

Alarm time: sets the alarm time. Press the

Category buttons to increase or decrease

Advertising