Clarion RPNP Plug and Play Receiver - Manual (Page 27)

User’s Guide 26
the hours. AM and PM switch
automatically.
Turn the Encoder knob to set the minutes.
Clockwise increases the minutes and
counterclockwise decreases them.
Press the Encoder knob to accept the
selected time (or press Menu to cancel).
Program Alert
This feature allows you to program the unit to switch
to a specific stream at a specific time. The top line of
the display shows: Set Program Alert.
Program Time/Day: selects the time and the day.
The default is 12:00 PM Monday.
With Time highlighted, press the Category
buttons to increase or decrease the hours.
AM and PM switch automatically.
Turn the Encoder knob to set the minutes.
Clockwise increases the minutes and
counterclockwise decreases them.
Press the Encoder knob to accept the
selected time.
With Day highlighted, the unit displays the
days of the week (default: Monday). Use
the Encoder knob to select the day.
Stream: displays the list of streams. Use the
Encoder knob to select the stream to
associate with the selected time.
Program Alert On/Off: turns the Program Alert
function on and off. Your settings are:
Program Alert On or Program Alert Off.
Auto Shutdown
You can configure the Plug and Play receiver to
automatically shut off after one hour. This is
especially useful if the Plug and Play receiver is
running on battery power, such as in your car.