COBY SNAPP CAM3005 - Manual (Page 9)

En
gl
ish
Getting Started Page 9
Loading a Memory Card
The camcorder records to SD, SDHC, or MMC
memory cards (maximum 16 GB).
Load a memory card by insert-
ing it into the memory card slot
on the left side of the camcorder.
Make sure that the gold contacts
of the memory card face the
LCD screen. Press the memory
card into the slot until it clicks
into place.
To remove the memory card, press it further into
the slot and then release. The card will spring
out of the slot.
To avoid data corruption, turn off the
camcorder before loading or removing
a memory card. Do not attempt to place
any object other than a compatible
memory card into the memory card slot.
Compatible cards should slide easily
into the memory card slot; if you en-
counter resistance, do not attempt to
force the card in.
Avoid touching the metal contacts of
the memory card.
Â
Getting Started
In this section, you will:
 Learn how to choose and load a memory
card.
 Learn how to install batteries.
 Learn how to turn the camcorder on.
 Learn how to change between movie,
photo, and review modes.