Scanning, P. 33 – Canon N650U User Manual

Page 33

Advertising
background image

33

S T E P 2

Scanning

Once you have set the magnification and scan mode, you may proceed with the
scan. Once the scan is complete, Plug-in Module CS-U automatically closes and
returns to the application software, such as CanoScan Toolbox CS or ArcSoft
PhotoStudio 2000, if the [Close Plug-in After Scan] setting is on. The following
provides an example of scanning from within ArcSoft PhotoStudio 2000.

To Initiate the Scan

Specify the Scan Area.

See Setting the Scan Area

(p. 30)

.

Click on the [Scan] button.

• The scan will start.
• If a check mark is present in the [Close Plug-in After Scan] option in the

[Preferences] menu, Plug-in Module CS-U will automatically quit when
the scan finishes.

Hint

• The scan button cannot be clicked if the scan area is set too small (less

than 64x64 pixels) or not specified.

• The scan cannot be performed if the required memory is larger than the

free memory.

Advertising
This manual is related to the following products: