Bulb replacement, Dual or quad headlamp/front park and, Turn signal — if equipped – Ram Trucks 2011 3500 - Owner Manual User Manual

Page 573

Advertising
background image

BULB REPLACEMENT

Dual Or Quad Headlamp/Front Park And Turn
Signal — If Equipped

1. Open the hood.

2. Disconnect and isolate the negative battery cable.

3. Remove the four plastic push-in fasteners that secure
the upper radiator seal to the grille support and both
fender ledges.

4. Remove the two plastic push-in rivets that secure the
upper radiator seal to the radiator.

5. Remove the upper radiator seal from the vehicle.

6. Remove the two headlamp assembly attachment
screws.

7. Reach into the front wheel house ahead of the front
wheel, remove the fastener, and lift the cover over the
access hole in the front of the wheel house splash shield.
Access to the rear of the lamp can be gained through this
access hole.

7

MAINTAINING YOUR VEHICLE

571

Advertising
This manual is related to the following products: