Defrost mode, Recirculation control – Ram Trucks 2013 3500 - Owner Manual User Manual

Page 320

Advertising
background image

cold or snowy conditions that require extra heat at the
windshield. This setting is good for maintaining comfort,
while reducing moisture on the windshield.

Defrost Mode

Air is directed through the windshield and side
window demist outlets. Use the DEFROST mode

with maximum blower and warm temperature settings
for best windshield and side window defrosting.

NOTE:

The air conditioning compressor operates in MIX

and DEFROST, or a blend of these modes even if the A/C
button is not pressed. This dehumidifies the air to help
dry the windshield. To improve fuel economy, use these
modes only when necessary.

Recirculation Control

Press this button to choose between outside air
intake or recirculation of the air inside the
vehicle. A LED will illuminate when you are in
Recirculation mode. Only use the Recirculation

mode to temporarily block out any outside odors, smoke,
or dust, and to cool the interior rapidly upon initial
start-up in very hot or humid weather.

NOTE:

• If the RECIRCULATION button is pressed when the

system is in Defrost mode the Recirculation LED
indicator will flash three times and then turn off to
indicate Recirculation mode is not allowed.

• Continuous use of the Recirculation mode may make

the inside air stuffy and window fogging may occur.
Extended use of this mode is not recommended.

318

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: