Rear lamp bar id marker (dual rear wheels), If equipped – Ram Trucks 2014 3500 - Owner Manual User Manual
Page 755
Advertising
Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped
1. Loosen the two screws and the housing to gain access
to the bulb sockets.
2. Turn the socket ¼ turn counterclockwise to access the
bulb.
3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and
housing.
Removing The Bulb From The Bulb Socket
Screw Locations
7
MAINTAINING YOUR VEHICLE
753
Advertising
This manual is related to the following products: