Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 50)

Chapter7. Appendix
50
5.8 SNMP Settings
You can set the communication and operation environment for the SNMP Agent. After changing values, you need to
click ‘Submit’ button. Then you will see the same page with modified values. Please note that you have to
‘Save & Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save current
settings.
In order to use the SNMP Agent, SNMP v1/v2/v3 Agent become enabled and pushes the [Submit] button.
Feature Default Descriptions
SNMP v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol (SNMP)
support.
(Options : Disable/Enable)
V1/2 Attribution ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Username/
Password eddy/admi
nistrator Configure the Username and the password when use SNMP V3.
The Password is at least 8 character string
TRAP IP/ Port
0.0.0.0/16
2 Configure the server IP address and Port which receive the TRAP
information.