Limitation of warranty – Sonics H540 E User Manual

Page 37

Advertising
background image

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

36

I N S T R U C T I O N M A N U A L • H A N D H E L D W E L D E R S

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

LIMITATION OF WARRANTY

This warranty does not apply to items subject to normal wear and tear or, to

equipment or tooling which has been subject to unauthorized repair, misuse,

abuse, negligence or accident. Misuse includes operation of equipment with

tooling that is not qualified for the equipment or tooling not properly installed

on the equipment.

Equipment which, in our judgment, shows evidence of having been used in

violation of operating instructions, or which has had the serial number altered

or removed, will be ineligible for service under this warranty.

For components and parts not manufactured by Sonics but included in

Sonics manufactured equipment, this warranty shall be limited to the

warranty as given to Sonics by said original component or part manufacturer.

Ultrasonic horns supplied by Sonics are manufactured to exacting

specifications and are tuned to vibrate at a specific frequency. Using an out-

of-tune horn will cause damage to the equipment and may result in warranty

nullification. Sonics assumes no responsibility for converters, horns or

fixtures not supplied by Sonics or for consequential damages resulting from

their usage.

Ultrasonic converters showing signs of excessive heat or contamination,

such as but not limited to, oils and moisture, are not covered by this

warranty.

Warranty does not apply to ultrasonic horns quoted as prototype,

experimental or of unusual design which, in our judgment are more likely to

fail in use.

Warranty does not apply to re-sharpening of ultrasonic blade type cutting or

slitting horns.

Warranty does not apply to knurl pattern wear on ultrasonic plastics and

metal welding horns and tips.

Warranty does not apply to ultrasonic horn or tip face wear when used with

plastics that are molded with fillers, such as but not limited to, glass or talc.

This warranty does not apply to ultrasonic plastics welding equipment, horns

or fixtures where metal-to-metal tooling contact time is in excess of 250

milliseconds.

This warranty does not apply to used or re-built equipment.

This warranty is non-transferable.

Go To Top Of Document

Advertising
This manual is related to the following products: