Soundmatters SUBstageWall Bracket - Manual

4.
4”
16.0”
Upper Bracket
Lower Bracket
Rubber Bushing Rubber Bushing
Note: When mounted, the bottom edge of the
SUBstage will be about 1-5/16” below the bottom
edge of the lower bracket.
SUBstage 250/100
Wall-Mount Screw Hole Template
for SSWB1 Mounting Bracket Kit
Note: When mounted, the top edge of the SUBstage will be
about 9/16” above the top edge of the upper bracket.
IMPORTANT WARNING: This bracket assembly MUST be
screwed solidly into wooden studs. Use this bracket ONLY if
you can screw into wooden studs.
WARNING: Make sure all pictures/etc. are well secured to
the wall as they may vibrate loose and rattle.
Pro Tuning Tip: Listen and tweak the settings for crossover,
volume and phase BEFORE final wall-mounting. Use the foam
end caps from the packaging to temporarily wedge the unit
into approximate position behind a chair
or sofa. Note, once unit is wall-mounted,
it will have to be UN-mounted to change
these settings
soundmatters international
tel: 775 981.1460
fax: 775 981.1465
www.soundmatters.com