Manual sensor cleaning, 3manual sensor cleaning n – Canon EOS 60D User Manual

Page 233

Advertising
background image

233

Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.

1

Select [Sensor cleaning].

Under the [6] tab, select [Sensor
cleaning
], then press <0>.

2

Select [Clean manually].

Select [Clean manually], then press
<0>.

3

Select [OK].

Select [OK], then press <0>.

X

In a moment, the reflex mirror will
lockup and the shutter will open.

CLn” will blink on the LCD panel.

4

End the cleaning.

Set the power switch to <2>.

3

Manual Sensor CleaningN

As power source, using the AC Adapter Kit ACK-E6 (sold separately) is
recommended.

If you use a battery, make sure it is fully recharged. If the battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.

Advertising