SunBriteTV SB-TS46 User Manual

Model sb-ts46 tabletop stand

Advertising
background image

Tabletop Stand Installation

(Note, the Tabletop Stand is an optional accessory. To order, contact your Authorized

SunBriteTV Dealer or SunBriteTV customer service.)

Tools Needed: Phillips screwdriver
Notes:

a. Do not attach the Tabletop Stand if you plan to install the TV on a wall mount or ceiling mount.
b. The Tabletop Stand can be installed either before or after the detachable speaker module

is installed. For purpose of demonstration, we are installing the Tabletop Stand without the

speaker module.
For demonstration purposes, this manual is showing how to install the right-half of the

Tabletop Stand. Because you will be working from the back of the TV, the Tabletop Stand will

appear on the left.
1. Prepare a fl at work surface, free of any debris or items which may scratch the front surface of

the TV.
2. Lay the TV face-down on the work surface with the bottom of the unit closest to you
WARNING: Use at least two people when transporting the TV.
3. Position the TV so that the bottom edge overhangs the table by about two inches.
4. The TV is shipped with three Tabletop Stand Mounting Screws on the TV, two on the back of

the TV, and one on the bottom. Remove the screws to expose Tabletop Stand Mounting Holes

(Figure 1). WARNING: Always replace tabletop mounting screws. Failure to do so will allow

water to seep inside your TV. This can cause serious injury and damage your TV.
5. The Tabletop Stand has adjacent Mounting Holes, two on the back and one on the bottom

(Figure 2).
6. Remove the Tabletop Stand Mounting Screws.
7. Place the Tabletop Stand on the TV so that the Tabletop Stand Mounting Holes align with

the TV Mounting Holes, and screw in the Tabletop Stand Mounting Screws to attach the Table

Mount to the TV. Secure tightly (Figures 3 and 4). See fi gure 5, 6 and 7 for images of installed

Tabletop Stand.

Tabletop Stand

Mounting Holes

on TV

Figure 1

Figure 2

Bottom

Back

Tabletop Stand

Tabletop Stand

Mounting Holes

Figure 3

Figure 4

WARNING: To prevent personal injury and/or damage to the

TV or personal property, use at least two strong people to

install or move the TV.

Front and back view of installed Tabletop Stand

Figure 5

Figure 6

Figure 7

Installation Instructions

Model SB-TS46 Tabletop Stand

For 46- and 55-inch series models

Advertising