Superlux SF115A - Manual

SF112A
SF115A
12” 2-way Active Sound Reinforcement Loudspeaker
15” 2-way Active Sound Reinforcement Loudspeaker
Live Sound, Speech, Playback, DJ, A/V, Institutional Venues
• 2-way bi-amplified, Active loudspeaker system
• 300W class-D, LF amp / 100W HF amp
• High-output precision titanium compression driver
• Neodymium long-throw low frequency transducer
• Built-in 24dB LR electronic crossover
• Mic/line input and pass-thru connector
• Lightweight molded composite cabinet
• 45 or 55 degree angles for aiming up toward
performers when used as a floor monitor
• Flyable, pole mountable, floor wedge-able ,
stackable, and wall mountable
• Optional active subwoofer SF118AS to extend very
low frequency response
The SF112A and SF115A are 2-way powerful and reliable loudspeakers. With
its high-current capacity amplifiers, high-output 1.75” titanium diaphragm
compression driver, and special magnet heat radiator woofer, they produce an
even smoother sound than the original. Our design goal was to build a sound
reinforcement speaker with:
• High output, most reliable and accurate playback.
• Very wide, smooth dispersion of mid and high frequencies.
• Light weight and ergonomical design for easy transport.
Through the combined resources of our analog engineers, and our experienced
transducer engineers, and the the result is a highly impact sound reinforcement
system which will amaze your hearing experience.
Specifications
Features General Description
SF112A SF115A
Model No. SF112A SF115A
Type 12" 2-way 15" 2-way
LF Power Amp 300W (class D), RMS 300W (class D), RMS
HF Power Amp 100W (class AB), RMS 100W (class AB), RMS
Input Type servo balanced servo balanced
Imput Impedance 20 kΩ 20 kΩ
Sensitivity Line: 1.23V (+4dBu) Line: 1.23V (+4dBu)
Freq. Range (-10dB) 50 Hz - 15k Hz 45 Hz - 15k Hz
Max Calculated SPL 128 dB 129 dB
Crossover Frequency 2.4 k Hz 2.4k Hz
HPF Switchable 100 Hz Switchable 100 Hz
Connectors Input: XLR
Output: Male XLR Link
Input: XLR
Output: Male XLR Link
AC Input Male IEC Male IEC
AC Power Requirement
(Depends on region)
115V, 50 Hz/60 Hz
230V, 50 Hz/60 Hz
115V, 50 Hz/60 Hz
230V, 50 Hz/60 Hz
HF Horn Coverage, Angles(-6dB) 90°H x 45°V 90°H x 45°V
Enclosure Material (PP) Polypropylene (PP) Polypropylene
Suspension 5 × M8:
Top×2, Bottom × 2 and 1 on rear of enclosure
5 × M8:
Top×2, Bottom × 2 and 1 on rear of enclosure
Finish/Color Black Black
Transducers/ Replacement Parts LF: L12FN 12” (305mm), Neodymium
HF: H44F, 1.75” (44 mm), Ferrite
L15FN 15” (381 mm), Neodymium
HF: H44F, 1.75” (44 mm), Ferrite
Dimensions(HxWxD) 62.3 Ч 37.8 Ч 36.3 (cm)
24.5 Ч 14.9 Ч 14.3 (in.)
70 Ч 47 Ч 41 (cm)
27.6 Ч 18.5 Ч 16.1 (in.)
Net Weight 19.5 kg (43 lbs) 22 kg (48.5 lbs)
Shipping Weight 21.8 kg (48 lbs) 24.5 kg (54 lbs)
MADE IN CHINA